Active Cool

If you are wondering what your aircon chemical overhaul involves, here is a short list of the required maintenance activities. These are all the everyday, mundane tasks performed for iron chemical overhauls, including: Checking and testing motor controls and thermostats of the device. Cleaning the blower wheel and fan cages with correct chemicals. Cleansing air conditioning pipes, blower hub and other drain with proper chemicals. Testing the hoses and connections for leaks. Making sure the filters are not clogged. Making sure the evaporator coil and condenser fins are clean and clear of any debris. Maintain air conditioners properly A lot of people don't realize how important it is to maintain air conditioners properly. That's why regular iron chemical overhaul is so important. Dust accumulation in your air conditioner can cause a lot of problems. In fact, some experts believe that poor air conditioner maintenance actually contributes to asthma attacks. So be careful when handling dust and be sure to follow manufacturer's instructions for proper cleaning and maintaining. The first step in an iron chemical overhaul is to remove all dust from the evaporator coil. This is best done by using a hair dryer on low. Once the dust is removed, blow it all out the exhaust port. Do this for both sides of the evaporator coil on each side of your air conditioner. If the dust cannot be blown out the back of your air conditioner, then simply have the evaporator coil serviced. The next step in iron chemical overhaul is to inspect the chemical feeders. It is recommended that this be done by a professional as well. While you're at it, also check your blower's filter, fans, ductwork, and any other devices that may need servicing or attention. Sometimes during an iron chemical overhaul, you may find yourself having to replace your evaporator coil, fan, or blower. If you do have to replace any of these items, it's always best to hire a professional to do it. When you finish up your regular cleaning and inspection of your unit, take a look at the evaporator coils. Usually a simple cleaning with water and mild detergent will be enough to get rid of built up dust. Also, if you notice that there is rust forming on any of the metallic parts of your unit, then you'll want to have it serviced as soon as possible. Usually a few hours' service is all it takes to get rid of rust. Once you have your units back together, the next step in iron chemical overhaul is to thoroughly clean the ductwork. Again, it is usually recommended that this be done by a professional to avoid any complications. This includes removing and changing out the filters on the coils, checking for any build up and spraying the ductwork with a solvent spray. Usually you can return the air ducts to normal operation within about ten days, but that's not always the case. The last step in the chemical overhaul is to perform a thorough inspection of your fan bearings. If these bearings are damaged, it could be that the metal shavings are also starting to leak and contaminate the bearings. This could cause serious problems to your unit, such as overheating. You should perform an inspection and determine if your fan is overheating. If it is, then you must replace the bearings immediately. If there is any sign of water leakage at any point along your air duct system, you need to perform an inspection of the water leakage points. Again, this is usually done by a professional to avoid any issues that may arise during the actual overhaul process. If you see signs of water leakage, then you need to make sure you treat the area immediately, because it could get very bad very quickly. The chemical overhaul will typically shut down the unit until the water leakage problem is fixed. It's important that you don't just fix one part of your unit's operation. If you don't pay attention to every part of your overhaul, then you risk performing the chemical cleaning incorrectly, or having to wait a long time to get your air-conditioning unit back up and running again. Every air-conditioning unit component, including the evaporator coil, fan, evaporator cover, and other components need to be inspected, serviced, and maintained on a regular basis. Doing a chemical overhaul is something you should do when you detect any problems with your air conditioning unit. However, performing a thorough cleaning of each part of the unit is even more crucial. By making sure you take each item through its normal servicing and dismantling process, you can avoid having to perform the entire overhaul again. By simply doing this simple process once or twice a year, you can dramatically increase the life span of your air conditioner. Visit Now! https://activecool.sg/aircon-chemical-overhaul/